
|

|
Spider Stake II
A practical replacement
has arrived for the flimsy “H” wire. The rugged webbed design
not only stands up to the wind, but will penetrate hard ground
much easier than a thin H-wire. The handy integrated step-peg
makes it easy to get the stake into even hard soil. The upper
torsion bar design evenly distributes wind loads and the dual
spring arms faithfully bring the sign back to attention. Use with
corrugated plastic substrates. The light weight stakes are pre-packed
in quantities of 50 and ready to ship. The compact 13" x 13" x
24" box weighs only 11lbs. packed, and ships at actual weight.
We’re
severely discounting our remaining stock of "old style"
Spider Stakes. Great for short-term corex signage. All sales final.
List
price ....99¢ each ----85¢
@ 25 ----75¢ @ 50 ----65¢
@ 1000
Blow
out ....49¢
each ----39¢ @ 25 ----35¢
@ 50 ----29¢ @ 1000
|
|

|
Window Clip
The USA Window Clip
is designed for easily sliding onto most any car or truck window.
Car dealer's love the high-impact tool because they're inexpensive
- especially when compared to a magnetic corrugated plastic roof-tent.
Whether parked in the street or in a driveway, real estate agents
use them on their car to draw attention to the open house they’re
hosting. USA Dealer Clips are lightweight and durable, and made
to be used over and over again. To assemble, simply insert the
prongs into the core of a corrugated plastic substrate.
$3.45 each----
$2.95 @ 30---- $2.65 @ 120
|
|

|
Step Frame
This realtor style
Step Frame accepts either metal or corrugated plastic 18” x 24”
substrates that simply slip into place. At slightly over 2lbs.,
their light weight makes for effortless portability. When the
need arises, additional screw bosses have been molded in for adding
top and bottom riders. The integral foot stirrup makes for an
easy installation. A 5-count box of frames weighs a mere 13lbs.
The 25-count package weighs in at less than 53lbs., including
the carton. In fact, you could even cut open a 25-count box and
slide a corrugated plastic sign face into each frame, reseal the
package, and they're ready to ship to your customer and still
weighing under the UPS 70lb weight limit.
$9.95 each----
$9.75 @ 5 ----$8.95 @ 25
|
|

|
A1A-Frame
A1A-Frame is a truly
economical A-frame option for displaying the standard 18" x 24"
or 24" x 24" sign. The wide 6mm channels and simple bungee-cord
elastic strap provides for an exceptionally easy setup. The lower
cross-member at the base allows the use of any conveniently available
ballast weight.
$8.95 pair----
$8.25 @ 12---- $7.95 @ 40
|
|

|
Hot-dog Stand
Hot-dog Stand is
designed for indoor table- and counter-top use. This item is an
extremely low-cost, compact design that supports the much smaller
versions of corrugated plastic. Perfect for displaying counter
top courtesy signage, such as: "This Window Closed", or, “Brake
Inspection Special".
99¢ each ----85¢
@ 50
|
|

|
A-Frame
Specifically designed
to accept a wide range of substrates, the USA A-Frame is the
most versatile A-frame. The deep dual channel end-cap design will
accept 4 mm and 6 mm corrugated plastic, dry-erase board, PVC,
and even composite aluminum. The unique bungee-style center support
and versatile design makes this unit extremely flexible and capable
of capturing a wide range of sign-face sizes all the way from
18" x 24" to 36" x 60" and beyond. Adaptable end-cap design completely
eliminates the need for fasteners. The lower cross-member at the
base allows the use of any conveniently available ballast weight.
$25.95 pair ----$23.95
@ 3---- $21.65 @ 60
|
Sign Stakes
|
“H
style stepstake”
- 30” long,
9 gauge galvanized steel inserts into coreplast sign. Holds
sign 15” off ground.
|
|
|
--
|
each
|
@25
|
@50
|
@1000
|
@5000
|
|
10”
wide
|
99¢
|
85¢
|
75¢
|
65¢
|
55¢
|
|
6”
wide
|
99¢
|
85¢
|
75¢
|
65¢
|
55¢
|
|

|
“T
back”
4ft black enamel
angle iron stake with 13 slots, galvanized foot step, and galvanized
crossarm for easy sign mounting. Stands 3ft above ground.
$4.50
|
|

|
“T
Cade”
42” black polyethylene
stake with multiple mount holes, foot step, and hammer point for
easy installation. Stands 3ft above ground.
$5.50
|
|

|
“Single
shaft stepstake”
10” by 38”, 9 gauge
galvanized steel inserts into coreplast sign with 1/2” round rod main
shaft. Holds sign 24” off ground.
$2.75
each
$2.25 @ 25
|
|

|
“Pitch
Fork”
1/8” steel inserts
into coreplast sign with 5/16” round rod main shaft all black enamel.
30”
$3.25 each
48” $3.50 each
|
|

|
“Mini
2-wire stepstake”
2" by 16", 9 gauge
galvanized steel inserts into coreplast sign. This stake is perfect
for small low-set yard signs, such as security system and lawn service
signs. Holds sign 8" off ground.
60¢
each
55¢ @ 50
|
|

|
“Piggy-back
stepstake”
6" by 8" for stacking
coreplast signs. Developed for adding a "rider" on top of real estate
signs. This stake can also be used to splice signs together for a sign
display.
65¢
each
55¢ @ 50
|
Pacific Coast Sign Supply®
940 S.E. 7th Avenue
Portland, OR 97214
Toll-Free 1.800.752.0028
In Oregon 503. 232.8535
fax 503.239.4206
sales@pacificcoastsignsupply.com
|